DJ-Tech uSolo Pro Panduan Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pemutar MP3 DJ-Tech uSolo Pro. DJ-Tech uSolo Pro 12 halaman. Professional usb

LCD DISPLAY PANEL

1. AUTO CUE － This will indicate if the Auto Cue is on or off. Press and hold the SGL/CTN for 1 sec. to turn

the Auto Cue function on and off.

2. TRACK METER － Indicates the number of the currently playing track or folder.

3. FOLDER/TRACK INDICATOR －This indicator shows you if you are looking at the track number or the

folder number in the TRACK INDICATOR.

4. PLAY / PAUSE INDICATOR －Indicates the device is in play mode (" "), or the player is in pause mode

(" ").

5. CUE INDICATOR － This indicator will glow when the unit is in CUE mode and will flash every time a new

CUE POINT is set.

6. SINGLE INDICATOR － This indicates that the track is in single play mode, the track will play once and go

to CUE mode in the next song. If the single indicator is not on the unit is in continuous mode the drive will

play all the remaining tracks on the USB until you stop it or power is interrupted.

7. MP3 INDICATOR － This will indicate that a MP3 is loaded.

8. TIME BAR INDICATOR － This bar gives a visual approximation of a track's remaining time. This bar will

begin to flash when a track is ending.

9. CUE & PLAY MEMORY BUFFER INDICATOR －The memory status is represented on the display by the

line bar being filled or emptied. The first bar itself represents 5 seconds of cue memory buffer. And following

bar each represents 1 second of play memory buffer. There are more than 9 seconds of play memory buffer

available when the bar line is being filled.

10. LOOP INDICATOR －Indicates if LOOP function is activated.

11. RELOOP INDICATOR － Indicates if a loop has been set which can be activated with the Reloop function.

12. PITCH INDICATOR － Indicator will light up when the BPM/ PITCH METER is showing the Pitch info.

13. BPM / PITCH METER － Shows either the percentage change in pitch or the BPM of the song.

14. BPM INDICATOR － Indicator will light up when the BPM/ PITCH METER is showing the BPM information.

15. TIME DISPLAY － These indicators detail the Minutes, Seconds, and Frames. The meter will display either

the elapsed time, or remaining time of a track.

16. CHARACTER DISPLAY － This will display the name of the file, artist, title...etc of the loaded MP3.

17. REMAIN INDICATOR － It indicates that the remaining time is shown on the TIME DISPLAY

18. ELAPSED INDICATOR －It indicates that the elapsed time is shown on the TIME DISPLAY.

19. AUTO BPM － This will indicate that the AUTO BPM counter is active.