Altronics Micron T 2162 Buku Petunjuk

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Alat Listrik Altronics Micron T 2162. Altronics Micron T 2162 4 halaman. Starter kit

Halaman Cetak

INTRODUCTION

Thank you for purchasing the T 2162 Soldering Starter Kit – a great beginning solution for your soldering

equipment needs! We believe that you will be more than satisfied with the many features and the

versatility of the accessories contained in your new soldering kit. Applications include: Radio controls,

hobbies and crafts, small electrical parts, PCBs, wires.

Before using the soldering iron inside, please carefully read the instruction manual and observe all

warnings and instructions for safe operation. Failure to follow all instructions here listed may result in

electric shock, fire, or serious injury. Retain the instructions for future reference.

PRODUCT DESCRIPTION

The unit has a slender soldering iron pencil design with a comfortable rubber grip that prevents operator

fatigue. The soldering iron is equivalent to Micron T 2445 and is connected to the mains power via a

burn-resistant approved power cord. These instructions and the T 2445 instructions are interchangeable.

T 2162 SPECIFICATIONS:

Input:220-240Va.c. 50Hz Class I

Output: 30W

Temperature range:.400°C to 420°C (752°F to 788°F)

Heater: Mica (Natural) [Minimal smoking 1

Length: 230mm

Weight: 150g

T 2162 STARTER KIT ACCESSORIES CONTENTS:

-Soldering iron and stand / holder

-Desoldering vacuum pump / sucker

-Long nose plier 5"

WARNING:

1. Operate this iron in a well ventilated area.

2. Do not tap the tip heavily in attempting to remove solder build-up.

3. Do not use it for non-soldering applications.

4. Do not disassemble the iron.

5. Only use recommended replacement parts e.g. tips.

6. Please turn off the power when you have finished using it.

7. This tool must be placed on its stand when not in use.

8. Do not immerse in water.

9. Before cleaning the unit, always remove the power lead plug from the socket. Unscrewing the

housing is not permitted.

10. This appliance is not intended for use by persons (including children) with reduced physical, sensory

or mental capabilities, or lack of experience and knowledge, unless they have been given

supervision or instruction concerning use of the appliance by a person responsible for their safety.

11. Children should be supervised to ensure that they do not play with the appliance. Failure to observe

this safety regulation could result in a risk to life and limb. The manufacturer or supplier shall not be

liable for damage resulting from misuse of the unit or unauthorised alterations.

Micron T 2162 Soldering Iron Starter Kit

usage]

-Diagonal cutting plier 4.5"

-Solder 2m length

-Spare tips available T 2446-48

1 |

P a g e