Altronics Micron T 2163 Panduan Memulai Cepat - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Alat Listrik Altronics Micron T 2163. Altronics Micron T 2163 4 halaman. Soldering iron and accessories kit
Halaman CetakMAINTENANCE AND GENERAL CLEANING:
If supply cord is damaged in anyway it must be replaced immediately, to avoid a hazard. Only a service
agent or suitably qualified person must carry out this work.
The iron may be cleaned with a damp cloth using small amounts of liquid detergent. Never submerse the
iron in liquid or allow any liquid to penetrate the case.
HOW TO SOLDER:
1.
File off any dirt, rust or paint on the part you wish to solder.
2.
Heat the part with the soldering iron.
3.
Apply rosin-based solder to the part and melt it with the soldering iron.
Note: When using non-rosin-based solder, be sure to apply a soldering paste to the part before
applying the solder.
4.
Wait for the solder to cool and harden before moving the soldered part.
CAUTION:
1.
Handle the heated soldering iron with extreme care, as the high temperature of the iron can cause
fires or painful burns.
2.
The first time you use the soldering iron, It man smoke slightly as the heating element dries out. This
is normal and should only last for approx. 10 minutes.
3.
Never file the specially-plated tip.
TIP REPLACEMENT AND DRESSING:
Micron T 2163 Soldering Iron and Accessories Kit
2 |
P a g e