Artison RCC 1000 Series Panduan Instalasi - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Penguat Artison RCC 1000 Series. Artison RCC 1000 Series 12 halaman.

Thank you for choosing Artison's RCC 1000 Subwoofer Amplifier. We are pleased that you

have selected our high-performance audio products.

INTRODUCTION

The RCC 1000 Subwoofer Amplifier was designed to ONLY be used with the RCC In-Wall Subwoofers,

RCC320 and RCC640 Modules. The RCC1000-SA is a powerful monoblock Class D amplifier with

advanced DSP software. The compact one rack height chassis can be installed into either cabinetry,

on an equipment shelf, or it can be rack-mounted into a standard 19" Equipment Rack. In any

installation be sure to provide adequate ventilation above and below the amplifier.

RACK-MOUNT INSTALLATION OF THE RCC1000-SA

Remove the amplifier's four feet from the bottom of the chassis.

2. Attach the included rack-mount ears to the front sides of the RCC1000-SA. NOTE: Be sure to use

the included hardware. There are 4 forward mounting screws per rack ear.

3. Mount into the 19" equipment rack, the amplifier will occupy 1 RU.

RCC1000-SA FRONT PANEL CONTROLS

1. STANDBY – This button will toggle between Standby Mode (Red LED) and ON (Blue LED).

2. LED – The LED in the GAIN control will indicate the following:

RED – STANDBY

BLUE – ON & MUSIC EQ. The MUSIC EQ setting provides a full range of deep musical bass to

enhance the listening experience. Subsonic Filter is 20 Hz.

RED & BLUE – ON & MOVIE EQ. The MOVIE EQ setting adds more volume and upper bass to

help recreate the true movie theater experience. Subsonic Filter is 35 Hz.