Altura Photo GJ0120 Panduan Pengguna - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Aksesori Kamera Altura Photo GJ0120. Altura Photo GJ0120 14 halaman. Dual wireless flash trigger set

Halaman Cetak

1. Turn OFF the power of both the camera and receiver.

2. Mount the transmitter onto the camera's hot shoe socket.

3. Mount the ﬂash onto the receiver's hot shoe socket.

4. If your ﬂash or studio light do not have hot shoe entries, connect the studio light cable to

the ﬂash or studio light to the ACC2 socket of the receiver.

5. Set the channel switches to the same position on both the transmitter and receiver.

(When using multiple ﬂash units, verify that all receivers are set to the same channel.)

6. Switch the receiver mode to "Flash" mode.

7. Press the test button on the transmitter to conﬁrm interaction.

8. If the transmitter and receiver status lights turn red while the ﬂash trigger light turns on, all

settings are correct.