Alvarado MSGX-PX Panduan Petunjuk Pemasangan dan Pemeliharaan - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pemasangan dan Pemeliharaan untuk Pagar & Gerbang Alvarado MSGX-PX. Alvarado MSGX-PX 20 halaman. Full height maximum security gate

Halaman Cetak

MSG Installation and Maintenance Instructions

Microswitch Push Bar Wiring Instructions

WARNING

1. The push bar is wired in series with the gate activation switch. To acomplish this, connect the RED wire

from the push bar to the POSITIVE (+) conduit lead wire on the power supply side of the conduit.

2. Connect the WHITE wire from the push bar to the POSITIVE (+) RED lock wire. The RED and WHITE

wires from the push bar as well as RED lock wire can be found coming out of the wire access hole located

at the top of the gate frame. [Figure 6]

3. Plug the power supply back into the appropriate VAC power source. If the push bar is functioning correctly,

the gate should open when the bar is pressed.

Figure 9

Power Supply

NOTE

Switch 1

White - Common (COM)

Black - Normally Open (NO)

Red - Normally Closed (NC)

PUD1201R5-0

Ensure primary power to the unit is off before any wire connections are made.

Magnetic Lock / Fail Safe Electric Strike with Push Bar Wiring Diagram

Black / White (+)

Microswitch Push bar can also be used for multiple applications, reference below to

determine wire configuration.

For Assistance: [email protected] +1 (909) 591-8431

Black (-)

Red

COM

N/C

Activation Source

(Supplied by customer)

Switch 2

Green - Common (COM)

Blue - Normally Open (NO)

Yellow - Normally Closed (NC)

Red

Magnetic lock

or Fail-Safe

Electric Strike

COM

Push Bar

Page 13