Asko CC4840S Panduan Petunjuk Pengoperasian - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Kap Ventilasi Asko CC4840S. Asko CC4840S 17 halaman. Cooker hood

Activation:

In order to activate the function apply a light pressure to the Timer button.

When the function is active the LED indicator of the set speed starts flashing.

When the lights are on, at the end of the Timer function, these automatically reduce the light intensity by

30-40%.

In order to deactivate the function, before the predetermined time, a further pressure of the Timer button,

will switch off the appliance.

Warning! If the intensive speed is operating, the Timer cannot be activated.

• Special Functions (Button E)

This function guarantees the continuous recycling of the air in the kitchen for a maximum of 12 hours.

By keeping the Timer button pressed for 4 seconds, when the appliance is switched off, the "CLEAN AIR"

function is activated.

This turns on the motor for 10 minutes every hour at the first speed; LED 4 flashes with an interval of 1

second ON and 2 seconds OFF.

After this time the motor is switched off and LED 4 remains fixed on the display; after another 50 seconds the

motor starts again for another 10 minutes and so on.

- In order to deactivate the "clean air" function press any button except for the lights one.

Active carbon/grease filter saturation:

When the LEDs on the display turn Red this means that the filters must be replaced or washed.

A – Anti grease filters:

When on the display the LED 1 is RED and starts flashing, it means that 30 hours have elapsed and that the

anti-grease filters have to be washed.

In order to reset the electronic memory press the OFF button for 5 seconds until LED 1 stops flashing.

B – Active Carbon filters:

When on the display the LED 2 is RED and starts flashing, it means that 120 hours have elapsed and that the

active carbon filters have to be replaced.

In order to reset the electronic memory press the OFF button for 5 seconds until LED 2 stops flashing.

Activation of the function for the indication of inserted active carbon filters:

By pressing simultaneously the OFF and ON buttons for 5 seconds the active carbon filters indicator function is

activated with an acoustic indicator of the Buzzer and the switching on for 1 second of all GREEN LEDs.

�

Deactivation of the inserted filters indicator function:

By pressing simultaneously the OFF and TIMER buttons for 5 seconds the active carbon filters indicator function

is deactivated with an acoustic indicator of the Buzzer and the switching on for 1 second of all RED LEDs.

- 8 -