Amcot LRC-LNS Manuale di funzionamento e manutenzione - Pagina 3

Sfoglia online o scarica il pdf Manuale di funzionamento e manutenzione per Accessories Amcot LRC-LNS. Amcot LRC-LNS 9. Cross flow cooling tower

identical air volume is achieved, resulting in lower operating costs with identical

performance.

2.3 INTERNAL SPACE

The internal structure of your LRC tower is designed to provide maximum working space for

repairs and maintenance. A sturdy platform, secured to the frame of the tower is provided for

your maintenance team. CAUTION: Due to slimes and algae that may build up the walkway

can become slippery. Take Precautions and where proper work boots.

2.4 Fan

The fan of your tower is designed to provide sufficient airflow at lower fan motor RPM and

operate at a lower decibel level.

2.5 Fill Materials

Fill material is made of PVC stiff sheets, which are formed by vacuum molding, differing

from standard materials used. This material has been tested both in laboratories and

applications, to perfection, enabling maximum water surface exposure, allowing for

maximum heat transfer.

2.6 Distribution System

LRC towers utilize gravity flow to distribute water evenly over fill material. Hot water

entering the tower is dispersed into a distribution pan located on top of the cooling tower next

to louvers. The hot water drops through the distribution pans that have predrilled and

predetermined hole placement to ensure that water is covering the entire fill media. This form

of distribution helps reduce pump size, friction loss, psi requirements, while providing even

distribution. The distribution plate within the pan helps slow water flow so that the heat

transfer can begin immediately.

INSTALLATION

3.1 CAUTIONS FOR INSTALLATIONS

A. Pick a location in which airflow is steady and free of structures, which may lower

efficiency.

B. Location should be relatively free of dust, acids, and other material, which could build up

in your tower and lower efficiency or damage the unit.

C. Keep the tower away from heat sources because these units raise the surrounding air

temperature, which will affect your cooling tower's efficiency. (If this cannot be

avoided, an atmosphere temperature should be taken and provided to the factory for

recalculation).

D. Provide enough space for piping.

Be sure to keep the tower vertical when lifting or mounting to foundation. Once on

foundation, anchor bolts and legs of tower should be fastened tightly.

The design of the cooling tower is to pull air through the air inlets (louver sides). Be sure

that proper space is provided between the tower and an obstacle if structure free areas are

not allowable. SEE TABLE BELOW

AMCOT COOLING TOWER CORPORATION OPERATIONS AND MAINTAINENCE MANUAL IS

OWNED BY LIANG CHI (USA) CORPORATION. THE NAME "AMCOT" AND AMCOT PRODUCT

LOGO ARE TRADEMARKS AND ANY REPRODUCTION WITHOUT WRITTEN CONSENT WILL