AMD SB750 Manuale d'uso - Pagina 13
Sfoglia online o scarica il pdf Manuale d'uso per Hardware del computer AMD SB750. AMD SB750 20. Based m/b for amd socket am3+ series processor
Anche per AMD SB750: Manuale d'uso (20 pagine)
Stampa la pagina
(7) Primary IDE Connector (40-pin block): IDE1
This connector supports the provided IDE hard disk ribbon cable. After connecting the
single plug end to motherboard, connect the two plugs at other end to your hard
disk(s). If you install two hard disks, you must configure the second drive to Slave
mode by setting its jumpers accordingly. Please refer to the documentation of your
hard disk for the jumper settings.
Two hard disks can be connected to each connector. The first HDD is referred to
as the "Master" and the second HDD is referred to as the "Slave".
For performance issues, we strongly suggest you don‟t install a CD-ROM or
DVD-ROM drive on the same IDE channel as a hard disk. Otherwise, the system
performance on this channel may drop.
(8) Serial-ATAII Port connector: SATA1~SATA6
This connector supports the provided Serial ATA2 IDE hard disk cable to
connecting the motherboard with serial ATAII hard disk.
(9) D-Sub 15-pin Connector: VGA
VGA connector is the 15-pin D-subminiature female connector; it is for the
display devices, such as the CRT monitor, LCD monitor and so on.
(10) Digital Visual Interface: DVI1
This interface standard designed to maximize the visual quality of digital display
devices such as flat panel LCD computer displays and digital projectors.
(11) SPDIF Out connectors: SPDIF_OUT1
The SPDIF output is capable of providing digital audio to external speakers or
compressed AC3 data to an external Dolby digital decoder. Use this feature only
when your stereo system has digital input function.
IDE1
Pin 1
IDE Connector
S A T A 5
S A T A 3
S A T A 1
S e r i a l -A T A 2 P o r t C o n n e c t o r
10 10
S A T A 6
S A T A 4
S A T A 2