10Bar G10 Manuale d'uso - Pagina 6

Sfoglia online o scarica il pdf Manuale d'uso per Camera Accessories 10Bar G10. 10Bar G10 10. Camera underwater housing

Replace the lid and make sure the lever is perpendicular to the side wall of the housing. Lock the lid by

press down the lever and turn until the lever is parallel to the side wall of the housing.

After replacing and locking the lid, make a final visual inspection of the main O-ring for contamination.

Note: If the O-ring is in good contact, a thin black line, about 0.5 to 1mm in width should be visible,

where the O-ring is in contact with the lid. Follow this line all the way round the edge of the seal, as a

final check that the seal is good.

4.6 Mounting the camera lens and ports

The 10 Bar G10 underwater housing interchangeable port system accommodate a wide variety of lens for

use underwater. The installation procedure is as follows:

Mounting the Conversion Lens Adaptor for camera