AEROBASK EPIC E1000 Manuale d'uso - Pagina 15
Sfoglia online o scarica il pdf Manuale d'uso per Strumenti AEROBASK EPIC E1000. AEROBASK EPIC E1000 19.
THE GARMIN GNC255 RADIOS
Our Epic E1000 Skyview is equipped with two Garmin
GNC255 radios for controlling COM and NAV
frequencies. One radio is above the pilot's PFD, the
second one is above the co-pilot's PFD.
Click the COM knob to power on the device (please note
that avionics needs to be switched on first.) The display
either shows COM or NAV; you can toggle this with the
C/N button. If a given frequency has a published name
(such as NTTM ATIS), it is shown beneath the frequency.
Use the FUNC button to toggle between traditional and
8.33 Khz channel spacing.
The other buttons of the GNC255 are not simulated in
this version of the aircraft.
Toggle
Click: Power-on
Active/Standby
Turn to
Toggle
Toggle
change
8.33 Khz
COM/NAV
standby
COM spacing
frequency
Name of
selected COM
frequency
To control the audio output of the radios, use the Garmin
GMA 350 audio panel, located on the pedestal, below the
MVP50 and above the throttle. Blue triangular LEDs
above the various audio source buttons (such as COM1,
NAV1, etc.) indicate that you will hear the related audio
source. Press the button to mute the respective source;
GMA350
press again to switch it on.
15