AeroClave RDS 3110 Manuale di risoluzione dei problemi - Pagina 2
Sfoglia online o scarica il pdf Manuale di risoluzione dei problemi per Apparecchiature per la pulizia AeroClave RDS 3110. AeroClave RDS 3110 4.
Anche per AeroClave RDS 3110: Manuale di riferimento rapido (5 pagine)
Stampa la pagina
1) Reassemble the unit using the reverse of initial steps 1-4
2) Run the unit to verify that functionality is restored.
3) If the problem is not resolved, please call your representative
(SYMPTOM: The unit appears to be running normally but is only blowing air from heads)
1) Locate the pump impellers at the bottom right of the unit. These are the 3 white plastic disc
shaped objects
2) Depress the 2 finger tabs located on the side of the impellers. Gently pull the impeller off the
spindle which extends into the impeller.
Rev 3.21
Reassembly Steps
Pump and Filter Check
*If no pump issues please skip to Step 6*
2