AmeriGlide Stair Lift Manuale per l'installazione - Pagina 8
Sfoglia online o scarica il pdf Manuale per l'installazione per Sistemi di sollevamento AmeriGlide Stair Lift. AmeriGlide Stair Lift 15. Stair lift
Stampa la pagina8
R O U T I N G
1 On the wall-side of the track, attach
call control bracket to the second
nut up from the bottom just
above the bottom track bracket.
2 Route the wire through
the top track channel
on the wall-side of the
track.
I
N
S
CAUTION: Assistance may be needed for this part of the
installation due to unit's and upper track section's weight.
1
Open unit box by cutting down
the sides of the box. Fold the
sides of the box down and slide
the unit and top track to the edge
of the steps.
2
Remove cardboard packing from
back of footrest.
3
Remove the shipping brace from
the upper section of track and set
aside.
T H E
L O W E R
T
A
L
L
I
Make sure the packing bracket is
removed and discarded before
attempting to operate the lift.
C A L L
C O N T R O L
3 At the top of the middle section
of track, tuck the wire underneath
the track out of the way.
4 You will finish routing the call
control wire after the top track
section is in place.
N
G
T
H
W I R E
E
U
N
I
Completely
remove the
packing
bracket.
T