Astro Pneumatic ADG100 Manuale - Pagina 6

Sfoglia online o scarica il pdf Manuale per Adattatore Astro Pneumatic ADG100. Astro Pneumatic ADG100 7. Grease gun drill adapter

Stampa la pagina

MODEL:

BULK LOADING

FILL WITH SCOOP OR WOODEN TOOL

1. Remove the gun head from the container tube.

2. Draw back the plunger handle entirely. Fill loose grease into empty container tube.

3. Reassemble the gun head onto the container tube. Release the plunger rod.

Push down the plunger handle.

IMPORTANT

• If gun loses its prime, it is due to air pockets in the lubricant.

TO REPRIME:

• Unscrew container tube 1-2 turns. Withdraw rod, push rod into container tube to expel the air pockets.

• Draw back plunger rod fully and release quickly. Repeat several times. This will help exert force to move the

rubber plunger to enter the cartridge and expel the air pockets which is essential for a grease gun to work.

• Push plunger rod all the way in, tighten the head to the container tube.

• Now your grease gun is ready to use.

IX. TROUBLE SHOOTING

Problem

Tool runs normal but

does not output grease

Plunger does not enter

the grease cartridge

Leakage from

outlet of gun head

ADG100

Problem Cause

Air pocket inside

container tube

Size of cartridge

not standard

The end edge of

cartridge is rough

or irregular

Hose is not

tightened securely

PRODUCT TYPE:

GREASE GUN DRILL ADAPTER

Recommendation

• Take off hose from Gun Head.

• Unscrew container tube 1-2 turns from Gun Head.

• Withdraw plunger rod, push plunger rod into

container tube to help expel the air pockets.

• Draw back plunger rod fully and release quickly.

• Operate power tool to check flow of grease.

• Repeat above steps if necessary.

• Re-tighten container tube to gun head firmly.

• Re-screw hose securely.

• Grease gun is ready for use.

• Check the size of cartridge corresponds

to specifications.

• Grease the plunger or cartridge end to help

it enter cartridge.

• Always use standard size of cartridge.

• Check that the end edge of cartridge should not

be damaged or folded and remains in exact

round shape. Otherwise the plunger rubber will

be prevented from entering the grease cartirdge.

If this case happened, correct above errors.

• Do not re-use the empty grease cartridge.

• Remove used cartridge from container tube

when bulk loading.

• The thread size is tapered, this means if the

hose is not tightened enough it will not seal.

Tighten with wrench.

Page 6