Canon CN7x17 KAS S/P1 Manuale operativo - Pagina 11

Sfoglia online o scarica il pdf Manuale operativo per Obiettivo della fotocamera Canon CN7x17 KAS S/P1. Canon CN7x17 KAS S/P1 34. Zoom lens
Anche per Canon CN7x17 KAS S/P1: Manuale d'uso (31 pagine)

Stampa la pagina

NOTE

Rated voltage: 12 VDC

Normal operation range: 10 to 17 VDC

If a battery or adapter is used, the output voltage may be higher than the rated voltage depending on the manufacturers

and therefore the above voltages must be observed strictly. If a voltage outside the normal operation range is used, the

drive unit may be damaged. And the lens power input has the positive and negative polarities. Make sure to connect

the power cable to the correct polarity when connecting the batteries or the adaptors. Connecting the cable to the

incorrect polarity may cause the damage to the product.

2-2. MOUNT THE HOOD ON THE LENS

The lens cap is attached to the lens at the factory. Please remove the lens cap and attach the hood as

instructed below.

Index

Lens Barrel

2-3. TURN IT ON

Turn on the camera and power supply equipment on, and the power of the lens will be supplied.

Hood

Hood Lock Knob

　When the lens is mounted, connect the cable from the

drive unit to a power supply equipment such as camera

or external power supply.

Or if the camera can be powered from the PL mount,

connect the cable from the drive unit to the connector

below the lens mount

* Connect the cable so that the arrow on the connector of

the cable aligns with the arrow of the connector of the

lens.

　Fit the hood on the front of the lens barrel.

　Align the index on the hood and lens barrel.

　Tighten the hood lock knob.

2 HOW TO MOUNT