Astrolite WARRIOR 360 Manuale d'uso - Pagina 8

Sfoglia online o scarica il pdf Manuale d'uso per Controllore Astrolite WARRIOR 360. Astrolite WARRIOR 360 13.

don't want to save the value of a certain channel, press and hold Release and then push the slider to

release the channel, the LED indicator of the slider will be off. It is recommended to release the

unnecessary channels to avoid unexpected lighting effects.

If it prompts error when saving a scene, it means there is an existing scene running in the number button,

or the new scene is blank not for save.

VI. Run a Scene

Step

Select one of SC1, SC2 and SC3 in which the scene is stored.

The LED indicators of the number buttons with existing scenes will rapidly flash.

Select a number button to run a scene. Once selected, the LED indicator of the number

button will be on, which means the scene is now running, and the LED indicators of the

sliders will be on; brightness changes with the output values.

Note:

If the running scene is using the same channel under manual control, the output will be by manual but not

by the scene. If you want to output the scene, press and hold Release and then push the slider to release

the manual output.

VII. Create a Chase

There are different ways to create a chase: Create scenes first and then select the scenes into the chase; create the chase

by directly adjusting the sliders; or, mix the first two ways.

A: Create a chase by adjusting sliders: This is the simplest way to create a chase.

Step

Press Program to enter programming mode

Select one of Chase1 and Chase2 to store the chase.

Select a number from 1--18 as the number of the chase. If the LED indicator of the number

button is on, it means there is an existing chase in it.

Select one or more desired fixtures.

Push the sliders to adjust the desired lighting effects.

If the LED indicator of E/XY is on, the pan/tilt value can be adjusted by the function wheels.

If the LED indicator E/XY is off, the speed/slope of the scene can be adjusted by the function

wheels.

Shortly press clear/exit once to clear the slider output.

Press and hold clear/exit, to exit programming mode.

Press Release, then push a slider to release the channel.

Press <=/SETX or =>/SETY to edit the previous or next step of the scene.

Press Del to delete a step.

Press Insert to insert a step.

Press ADD to save the lighting effect into the chase. It will automatically jump to the next step.

Repeat Step 4—7 to edit a new lighting effect.

Description