Al Huraiz EVERHOT Manuale - Pagina 3

Sfoglia online o scarica il pdf Manuale per Scaldabagno Al Huraiz EVERHOT. Al Huraiz EVERHOT 9.

Stampa la pagina

Assembly diagram of

ASSEMBLY

INSTRUCTIONS

Before choosing the location and the

installation point, ensure that it is not

shaded by any obstacle (trees, build -

ings... etc, see obstacle diagram page

10).

The same support base is used for

either sloping or ﬂat surfaces.

Connect the plates A, B, C, D, U and Z

by screwing them tight as shown in the

drawings.

For models 260 and 300, screw also the

plates F. Screw gently the bottom plate

E on the plates B.

attention

The top plate E is adjusted after the

placement of the collectors.

Plumb the support base on the ﬂat sur-

face's level. Place the collector(s), on

the support base and then screw it with

the moly plugs and the screw nuts on

the concrete, according to your country's

regulations.

LENGTHS OF THE

SUPPORT BASE PLATES

A = 2015 mm

SAME FOR

B = 2360 mm

ALL MODELS

C = 1150 mm

D = 1180 mm

FOR MODELS

200-300

E = 1150 mm

FOR MODELS 200

with one collector

E = 1430 mm

FOR MODELS 200-300

with two collectors

SAME FOR

ALL MODELS

F =

930 mm

ONLY

FOR

MODELS 260-300

the support base on a ﬂat surface

Support base for

200 & 300 (with 2 collectors)