Baumer HUBNER BERLIN HMG10 Istruzioni per il montaggio e il funzionamento - Pagina 4

Sfoglia online o scarica il pdf Istruzioni per il montaggio e il funzionamento per Convertitore multimediale Baumer HUBNER BERLIN HMG10. Baumer HUBNER BERLIN HMG10 32. Absolute encoder profinet with magnetic sensing
Anche per Baumer HUBNER BERLIN HMG10: Istruzioni per il montaggio e il funzionamento (40 pagine)

Stampa la pagina

IMPORTANT NOTES

1.1

Symbol guide

Warning

Disregarding could result in serious injury, death or damage to property

)

Attention

Disregarding could result in damage to property or damage/malfunction of the device

Information

Additional information and recommendations

1.2

Intended use

The encoder HMG10/HMG10P is a precision measurement device for the acquisition of

speed/position information for the control of drive units and the provision of electronic out-

put signals for downstream devices�

The device must not be used for any other purpose� The function of the device is descri-

bed in this mounting instruction� The customer must check the suitability for the purpose

intended�

Mounting and selection must be executed by authorized and qualified personnel. Moun-

ting, electrical commissioning or any other work with the device or system is to be perfor-

med by appropriately qualified staff only.

Do not put the device into service if there is any visible evidence of damage�

Do not operate the device beyond the limit values stated in this mounting instruction�

Any risk of personal injury, damage of the system or company equipment due to failure or

malfunction of the device must be eliminated by corresponding safety measures�

Warning

Disregarding intended use could result in serious injury or damage to property�

1.3

Exclusion from liability

The manufacturer is not liable for any damage to persons or property resulting from unin-

tended use of the device�

1/27

MB248EN - 11171699, 19A2, Baumer_HMG10-PROFINET_II_EN