Asus AP6000 Manuale di riferimento hardware - Pagina 19

Sfoglia online o scarica il pdf Manuale di riferimento hardware per Server Asus AP6000. Asus AP6000 32. Dual pentium® ii server

II. System Components

Hot-Swap Tray Usage

Each hot-swap tray provides an aluminum carrier for a single SCSI hard

disk drives with a maximum height of 1 5/8 inch, width of 4 inches, and

length of 6 inches. The aluminum tray provides protection and maximum

heat dissipation for almost all types of high speed SCSI disk drives. The

provided cables and wires connect to the SCSI hard disk drive and screws

are needed to secure the tray to the bottom of the SCSI hard disk drive.

Power Connector

SCSI ID

Hot-swap tray and its connectors

The hot-swap tray provides wires for connecting the activity LED, power

LED, SCSI ID, power, and SCSI signal. Connect the 8 pin connector to the

SCSI Address pins according to the colors shown. Connect the 2 pin con-

nector to the activity signal pins according to the colors shown.

IMPORTANT:

The following is only an example. Always consult your

hard disk drive documentation or labels for the exact wiring specific to your

hard disk drive make and model.

Hot-swap tray SCSI ID & activity LED wires connected (Seagate HD)

AP6000 Hardware Reference Guide

SCSI Cable

Aluminum Tray

Activity LED

(ALED)

Seagate Cheetah (ST34501W) side opposite power & SCSI

White

Green

Red

Unused

Blue

Yellow

Black

Activity

SCSI Address (ID#)

Signal

Orange

Brown

Pin 1

Pin 2

Red

Black