Amplitec C20M-5B1 Manuale d'uso - Pagina 9
Sfoglia online o scarica il pdf Manuale d'uso per Ripetitore Amplitec C20M-5B1. Amplitec C20M-5B1 13. Signal repeater
C20M-5B Five Signal Repeater
Item
Auto shut-off Functions
Self-oscillation Elimination
Link Balance Function
Auto screen lights off
Power Supply
Power Consumption
RF Connector
Impedance
Environment Conditions
Humidity
Operating Temperature
Installation Guides
Installation Requirements
1) With stable and independent power supply.
2) No corrosive gas, smoke or liquid leakage.
3) Sun block and cool for device's safe running.
4) Easy for cabling and dissipation, safe and easy for maintenance.
5) Waterproof and under thunder protection.
Installation Tools
No.
Items
1
Percussion drill
2
Wrench
Mobile phone
3
for testing
4
Multimeter
5
Screwdriver
6
Waterproof tape
Installation Steps
The repeater should be installed on a solid and hard plane. The installation steps are as
follows:
1) Find a suitable site according to the installation requirements and dimension of repeater.
2) Drill 4 holes with the percussion drill according to the installation holes. Sizes are 7mm.
The expected sites of the holes are as the following diagram.
Uplink stand-by
Self-oscillation
shutdown
Over input turn-off
Function
Over-heat protection
Quantity
1
Drill holes on wall, self-provided
1
Reinforce the interface connection, self-provided
1
Test installation effectiveness, self-provided
1
Test voltage and wiring connection, self-provided
1
Tighten or fasten the device, self-provided
Prevent liquid from leaking into the feeder
A few
interface, self-provided
Uplink
Available
Available
Available
Available
Available
Available
No operation within 3 minutes
DC: 12 V
< 45 W
N-Female
50 ohm
IP 40
< 90 %
0℃ ~ +50℃
Remarks
7
Downlink