AmpliVox Mity-Lite SW300 Manuale d'uso - Pagina 4

Sfoglia online o scarica il pdf Manuale d'uso per Altoparlanti AmpliVox Mity-Lite SW300. AmpliVox Mity-Lite SW300 8. Battery powered pa system with bluetooth

Stampa la pagina

CONTROLS / SIDE PANEL

MASTER CONTROLS

WIRED MICROPHONE: 1/4" input jack (A).

AUX IN: 3.5mm input jack for other audio devices (B).

MIX OUT: 3.5mm output jack for recording device, addition

speaker (C).

TONE CONTROL: Rotate knob clockwise to increase

TREBLE to desired level (D).

POWER SWITCH: Rotate MAIN VOL. knob clockwise to

the ON position. When power switch is in the ON position,

the LOW BATTERY (RED) will be illuminated (F).

BATTERY CHARGING: LOW BATTERY LIGHT (F) will

flash when battery needs to be charged. To charge the bat-

tery, connect (H) of the PA to 110-220VAC using the sup-

plied power cord and AC Adapter. The green led (G) will

flash indicating battery is charging. Solid green light means

charging is complete. The battery will charge when unit is

operating with AC power, HOWEVER the unit will charge

faster with the power switch in the "off" position.

Charging time is about 4 hours.

16 CHANNEL UHF RECEIVER

NOTE: CHANNEL NUMBER SELECTED ON PA MUST

ALSO MATCH CHANNEL NUMBER ON WIRELESS

HANDHELD MICROPHONE.

CHANNEL SELECT: Select a channel (1-16) by rotat-

ing the knob to select channel number.

POWER / VOLUME CONTROL: To turn on wireless

receiver, rotate volume control knob clockwise. PW

will light. This separate volume control is used to set

output level of the wireless microphone. Set WIRE-

LESS LEVEL and MASTER VOLUME level at desired

setting.

WIRELESS RECEIVER

BATTERY DOOR

MASTER CONTROLS

BLUETOOTH