AmpliVox Mity-Lite SW300 Manuale d'uso - Pagina 7

Sfoglia online o scarica il pdf Manuale d'uso per Altoparlanti AmpliVox Mity-Lite SW300. AmpliVox Mity-Lite SW300 8. Battery powered pa system with bluetooth

Stampa la pagina

TROUBLESHOOTING GUIDE

PROBLEM & ITEMS TO CHECK

UNIT WILL NOT TURN ON

· Is unit plugged in?

· Are batteries charged?

UNIT OPERATES ON AC BUT NOT BATTERY

Charge battery

Replace battery

SOUND IS MUFFLED

Tone too low

FEEDBACK: A LOUD SQUEALING, SHRILL OR HOWLING

SOUND THAT IS SELF GENERATED

Feedback occurs when a microphone is too close to the

speaker or the microphone volume is too high, or the

microphone is pointed towards the speaker. It is also caused

by sound reflecting off hard surfaces.

Reduce or eliminate Feedback by

- Pointing the microphone in a different direction

- Keeping the microphone BEHIND the speakers

- Turn down the volume levels

POWER IS ON, BUT NO SOUND

Check main volume level.

If using wireless, be sure receiver and transmitter battery is

installed and both units are turned on.

MICROPHONE SIGNAL IS WEAK

If microphone has batteries, check batteries.

Check cables/connectors.

WIRELESS MIC DOES NOT WORK

Check that transmitter batteries are fully charged and ensure

transmitter is on.

Does green "signal" LED light when transmitter is turned on?

Are the transmitter and receiver on the same channel? (1-16)

WIRELESS MIC CUTS IN AND OUT

Is unit visible (line of sight) from user? If not, move unit into

view when using wireless microphone.

Does the green "signal" LED go out when signal drops out?

Check batteries in Handheld Microphone transmitter.

BATTERY WILL NOT HOLD CHARGE

Replace Main Batteries every 1-2 years if unit is not left

charging when not in use.

A full charge is best obtained when the unit is off and

plugged into the AC outlet for several hours. After a

year or two the battery may need to be replaced. Batter-

ies are available from Amplivox.

NEED HELP? Call 800-267-5486