Amprobe LH41A Manuale d'uso - Pagina 8

Sfoglia online o scarica il pdf Manuale d'uso per Strumenti di misura Amprobe LH41A. Amprobe LH41A 8. Clamp on ammeter

Do not use the instrument if any part of it appears to

be damaged or if a malfunction of the instrument is

suspected.

When using the instrument ensure that your fingers are

behind the protective barrier see Fig.

Clean the case periodically by wiping it with a damp cloth

and detergent. Do not use abrasive cleaners or solvents.

Do not immerse the instrument in liquids.

BATTERY REPLACEMENT

SAFETY WARNING

Before removing the battery cover,

make sure that the instrument is

removed from any live electrical circuit.

When the Low Battery symbol is illuminated in the

display the minimum operating battery voltage has been

reached. Refer to Fig.. and use the following procedure

to replace the battery.

Unclamp the meter from the conductor, turn it off using

the OFF / Hold power switch. Loosen the captive screw

which secures the battery cover. Lift the cover through

30° and pull it clear of the instrument body as shown in

Fig. The battery is then accessible. Replace the battery

and re-fit the battery cover and fasten the screw.

Replacement with other than the specified type of

battery will invalidate the warranty. Fit only Type 9 V PP3,

Alkaline (MN60 ).