Amprobe MO-100 Manuale d'uso - Pagina 16

Sfoglia online o scarica il pdf Manuale d'uso per Strumenti di misura Amprobe MO-100. Amprobe MO-100 18. Milliohm meter

MAINTENANCE AND REPAIR

If there appears to be a malfunction during the operation of the meter, the

following steps should be performed in order to isolate the cause of the

problem.

1. Check the battery. Replace the battery immediately when the symbol

"N" appears on the LCD.

2. Review the operating instructions for possible mistakes in operating

procedure.

Except for the replacement of the battery, repair of the meter should be

performed only by a Factory Authorized Service Center or by other qualified

instrument service personnel.

The front panel and case can be cleaned with a mild solution of detergent and

water.

Apply sparingly with a soft cloth and allow to dry completely before using. Do

not use aromatic hydrocarbons, Gasoline or chlorinated solvents for cleaning.

1. Disconnect the test leads from the instrument and remove the battery

cover and the batteries.

2. The tester's battery is situated under the tester.

3. Replace with eight 1.5V AA light batteries, taking care to observe

correct polarity. (Alkaline batteries are recommended.)

4. Reinstall battery holder and the battery cover.