DPA DPA 4099 Trumpet Manuale d'uso - Pagina 10

Sfoglia online o scarica il pdf Manuale d'uso per Microfono DPA DPA 4099 Trumpet. DPA DPA 4099 Trumpet 16. Sax clip microphone; trumpet clip microphone; guitar clip microphone; violin clip microphone

Stampa la pagina

UsInG THe DPa aDaPTers

All DPA 4099 Guitar, Violin, Sax, and Trumpet microphone cables

are terminated with a proprietary MicroDot connector. When used

in conjunction with our range of over 35 adapters, the MicroDot

connector provides the ability to connect to virtually all available pro

wireless systems.

Various wireless systems require the use of electronics inside the

adapter to optimize the signal level, the DC offset, and powering of

the built-in microphone preamplifier. Using the adapters from DPA

ensures the correct electronic circuit with the listed types of wireless

systems (please visit www.dpamicrophones.com).

Do not attempt to employ non-standard adapters or connectors as

you might damage the microphone.

A connector-tightening tool is supplied with each adapter and

should be employed whenever the MicroDot connector needs to

be tightened. Utilize the tightening tool before use to ensure the

connection is secure and that the cable cannot rotate by the cable

relief.

The enclosed XLR adapter, DAD4099, allows the 4099 to work as a

regular 48V phantom powered microphone. The DPA 4099 features

a belt clip and a permanent first-order low-cut filter at 80 Hz. The

filter minimizes handling and wind noise at the microphone output

without compromising sound quality, as these instruments have no

appreciable frequency response below 80 Hz.

The belt clip can be removed and replaced with the enclosed ring

for use of the DAD 4099 directly in stage boxes or mixing consoles.

Dismount the cap of the adapter, remove the belt clip and place

the black ring instead. Remount the cap.

Ground

Signal +

Signal -