DPA 4088 Manuale - Pagina 5

Sfoglia online o scarica il pdf Manuale per Cuffie DPA 4088. DPA 4088 7. Cardioid headband
Anche per DPA 4088: Manuale d'uso (10 pagine), Manuale (7 pagine), Manuale d'uso (10 pagine)

Stampa la pagina

Protection cap

Clothing clip for d:fine

The d:fine

Omnidirectional and d:fine

tional, d:fine

Directional microphones come with a red plas-

and d:fine

tic cap which serves to protect the microphone

The supplied clothing clip allows you to attach

head when putting on make-up, hairspray and

the cable to your clothes, thus relieving the

more.Remove the cap before use.

cable draw to the headset mic. This is essential

on the single-ear headset mic.

Correct use of microphone grids

The two different protection grids that are supplied with 4066, 4067, and d:fine66 are

for acoustical equalization, depending on the placement on the performer. Remove the

premounted soft boost grid before replacing it with the high boost grid.

Color codes & cable steer

The d:fine

Omnidirectional and d:fine Direc-

tional microphones come with a number of

Cleaning the mic grid of d:fine

cable steer clips in different colours. Mounted

Remove the microphone grid from the microphone element and clean the grid using a soft cloth

on the cable relief, this clip allows for quick rec-

and distilled water only. Make sure the grid is dry before remounting it on the microphone ele-

ognition of a specific headset microphone.

ment. This is not possible on the 4088 and d:fine

microphone housing and the protection grids are not removable. Therefore, no attempt should

be made to clean the grid surface and extreme care should be taken not to clog the grids with

makeup e.g.

Omnidirec-

Directional, d:fine

88.

4065, 4066, 4067 and d:fine

88 as the diaphragm is protected inside the

Cable maintenance

The cable is usually longer than required. Make sure that superfluous cable is wound up

in soft figure-of-eight loops (preferably 6 – 8 cm (2.5 – 3 in) diameter) and avoid kinks

in the cable.

Use organic oil (e.g. olive oil) or lukewarm distilled water to remove residue from

tape, glue, or make-up on the cable. Do not bend the cable or rub it harshly, it may

stress the inner cores of the cable and cause them to break over time.

General Maintenance

The d:fine Headsets are resistant to high levels of humidity. However, care must

be taken to keep the headset microphone away from exposure to water and

cleaning fluids, and to keep the microphone head dry at all times. Do not use spray

or use fluid containing chemicals that could remove static electricity on or close to

the microphone. This could cause permanent damage.

MicroDot connectors and adapters

To provide users with safe and compact mounting of connec-

tors, all headsets from DPA are fitted with the MicroDot con-

nector as standard. A broad range of connection adapters is

offered as optional accessories for most wireless systems for

professional use. See www.dpamicrophones.com/adapters

Use the supplied connector-tightening tool whenever the

MicroDot connector needs to be fastened to the adapter for

long periods of time.