Amprobe ROBIN KMP7010 Manuale d'uso - Pagina 13

Sfoglia online o scarica il pdf Manuale d'uso per Apparecchiature di prova Amprobe ROBIN KMP7010. Amprobe ROBIN KMP7010 16. Ground resistance tester

Check the wiring connections, if soil is too dry, or if auxiliary earth

stakes are within the specified measurement distance. When the earth

resistance is greater than the selected measuring range, LCD display will

show "OL"(overload).

4. Auto Power Off: The tester will turn itself off after 10 minutes when in

idle.

5. Back Light: Press LIGHT/LOAD to turn ON or turn OFF the backlight.

6. Hold/Save Function: While testing, press "Hold/Save" button,save data

function will be on, the displayed testing value will be saved and LCD

displays the corresponding sign. Press "Hold/Save" button again to exit

this function.

7. Storage function:

a) Storage data: Press"Hold/Save"button for about 2 seconds. Storage

function will be on and save the corresponding data. Press "Hold/

Save"button again to save the 2nd data; press"Hold/Save"button

again to save the 3rd data and so on...,Press"Hold/Save"button for

about 2 seconds to exit this function.

b) Read data: Press"Light/Load"button for about 2 seconds to read the

saved data in memory. it will show number 01 saved data. Press"Light/

Load"button again to show number 02 saved data and so on (up to

20th saved data).To return to the previous saved data, press "Hold/

Save". When "Hold/ Save"button and "Light/Load"button is working

as Up and Down selection button, pree "Light/Load" button for aout

2 seconds to exit this function.

c) Clear saved data: Press"Hold/Save"button and "Light/Load"button

simultaneously, then turn on the tester by rotating the ON/OFF dial

to any position. LCD display will show"C L .", All data in the storage

memory will be deleted.