Dr. Kern Skinfresh Tancan 3000 Istruzioni per il montaggio e il funzionamento - Pagina 10

Sfoglia online o scarica il pdf Istruzioni per il montaggio e il funzionamento per Prodotti per la cura della persona Dr. Kern Skinfresh Tancan 3000. Dr. Kern Skinfresh Tancan 3000 18.

Stampa la pagina

Now let the installation plate (24) drop down

over the upper bearing, and tighten the two

nuts (26) ﬁ rmly (Fig. 18).

7. Electrical connection of the ele-

ments

All 3 elements have their electrical connec-

tions at the top, and are connected to the

control unit (29) by means of the 3 plugs (30

- 32) (Fig. 19).

29 = Control unit

30 = Connection cable, right element

31 = Connection cable, left element

32 = Connection cable, door element

35 = Main connection cable

Fig. 18

Fig. 19

8. Installing the upper trim panels

Finally, ﬁ t the three trim panels (33) around

the upper edge of the system (Fig. 20), using

for each panel two self-tapping screws (34)

on the outside, and two M4 screws in the

central area.

Ensure that a distance sleeve is placed bet-

ween the trim panel and rear wall of the unit

at each attachment point.

9. Installation of main connection ca-

ble / cover panel

The main connection cable (35) is pre-as-

sembled to the control unit (29), and lies

rolled up on the exhaust unit.

Take the cable (35) and lead it down along

the side of the system (Fig. 21).

Now remove the cover panel (37) from pa-

ckage 3, and ﬁ t it as shown in Fig. 22.

Note: The existing screws in the rear

walls are used for the attachment of

the cover panel (37). These screws

must be removed before ﬁ tting the co-

ver panel.

Fig. 20