Electrolux # Manuale d'uso e manutenzione - Pagina 13

Stampa la pagina

Electrolux # Manuale d'uso e manutenzione

1. Setting Surface Controls

OPERATING THE SINGLE SURFACE RADIANT

ELEMENTS

The cooktop has single radiant surface elements at 2 locations; the right and left

rear (Figs. 1 & 2) element positions.

To Operate the Single Surface Element

1. Place correctly sized cookware on the radiant surface element.

2. Touch and hold the

above the

seconds the request to Power ON the cooktop will clear.

3. Touch and hold the

beep is heard. The display will show " -- ".

Note: If no further pads are touched within 10 seconds the request

to power the element ON will clear.

4. Touch

pad once for Lo.

5. Each touch of the

power level from 9.0 through 3.0 by .5 increment. Simmer power

levels between 3.0 and 1.0 will decrease or increase by .2

increment. Lo is the lowest power level available.

Note: The power level may be adjusted at any time while the element is ON.

6. When cooking has been completed touch the

and if no other surface element is used touch the

Each surface element provides a constant amount of heat at each setting. A glowing

red surface heating area extending beyond the bottom edge of the cookware indicates

the cookware is too small for the surface heating area.

Note: The HE message will remain ON if the cooktop is still hot and will remain ON until

the heating surface area has cooled sufficiently.

CAUTION

Radiant surface elements may appear to have cooled after they have been turned OFF. HE (Hot Element)

message will turn ON and will continue to glow until the glass cooktop has cooled down to a moderate

level. The glass surface may still be hot and burns may occur if the glass surface is touched before the

indicator light has turned OFF.

Do not place plastic items such as salt and pepper shakers, spoon holders or plastic wrappings on

top of the range when it is in use. These items could melt or ignite. Potholders, towels or wooden spoons

could catch fire if placed too close to the surface elements.

On/O ff

O O n/Off

POWER

On/Off

Setting Surface Controls

key pad until a beep sound. The power indicator light

POWER

will turn ON. Note: If no other key pad is touched within 20

POWER

pad for the desired element position until a

On/Of f

pad once to turn ON the power level to HI. Touch

pad will decrease or increase the

UTION

pad once to turn the element OFF

On/Off

key pad to turn off the cooktop.

POWER

Fig. 1

Fig. 2