Advanced Elements AE2042 Manuale di istruzioni - Pagina 6

Sfoglia online o scarica il pdf Manuale di istruzioni per Barca Advanced Elements AE2042. Advanced Elements AE2042 13. Accessory frame system

After Cutting the openings for the Mounting Grommets, position each

Mounting Grommet so that it is popping up through the newly cut

openings from the underside of the deck of the kayak. SEE IMAGE 3.

Install the Accessory Frame by inserting the Fame Body and the Detachable

Arms through the grommets and connecting all parts. This will ensure

proper placement before gluing the Mounting Grommets in place.

Gluing the Mounting Grommets:

After ensuring proper fit and alignment of the Mounting Grommets,

remove the Accessory Frame, set it aside, and pull all of the grommets

out of their newly cut holes.

1. Place your four sheets of cardboard on the inside of your kayak deck

and position them under each of the newly cut rectangular grommet

holes.

2. Starting with ONE Mounting Grommet at a time: In a well-ventilated

area, apply enough glue to the top side of the Mounting Grommet disk

to spread around so that the glue is evenly applied on the disk.

3. Position the Mounting Grommet so that it is popping up through the

newly cut hole in the deck of your kayak, SEE IMAGE 3. Make sure

you have your cardboard in place. Place your hand underneath the

sheet of cardboard to ensure that it is in contact with the bottom of

the grommet and apply pressure to flatten out the grommet disk

while making sure that the disk is in full contact with the deck material

of the kayak.

4. Once you have good contact between the deck material of the kayak

and the Mounting Grommet, remove your hand from under the

cardboard and proceed to apply duct tape around the perimeter of

the grommet hole on the outside of the kayak. Apply the duct tape

so that it flattens out the material around the base of the grommet

meanwhile ensuring good contact between the material and the

grommet disk. SEE IMAGE 4.

Image 3

Continued on Next Page

Accessory Frame System Instruction Manual

Image 4