Advanced Elements AE2042 Manuale di istruzioni - Pagina 8

Sfoglia online o scarica il pdf Manuale di istruzioni per Barca Advanced Elements AE2042. Advanced Elements AE2042 13. Accessory frame system

Before starting, inflate your kayak so that you can have it ready for

positioning the Accessory Frame and for gluing the Mounting Grommets

into place.

1. Important: Begin by using your Exacto/Matte knife to cut a small notch

in to each of your 4 Mounting Grommets. This notch will be used to

mark for proper alignment of the grommets when gluing. SEE IMAGE 5.

2. Slide two of the Mounting Grommets onto the main Frame Body and

position them so that they are just past the holes in the frame.

SEE IMAGE 1.

3. Slide one Mounting Grommet onto each of the Detachable Arms and

position them so that they are at the same end as the black pole cap.

SEE IMAGE 2.

4. Once the Mounting Grommets are in place, attach the Frame Arms

to the Frame Body and place the assembled Accessory Frame (with

the Mounting Grommets in place) on a flat surface and rotate the

Mounting Grommets so that the disk portion of each grommet lays

flat and even on the surface.

5. Locate the two Mounting Templates included with these instructions

and place them underneath the grommets, aligning the circular shapes

on the templates with the disk portion of the grommets. Align the front

grommets first (these are the grommets nearest to the push buttons on

the frame assembly), then slide the rear grommets (these are the

grommets on the detachable arms) as needed to align them with the

other set of circles on the templates; this will ensure proper spacing

between the two grommets on each side of the frame.

Accessory Frame System Instruction Manual

Image 5