Advanced Elements DragonFly 2 Manuale d'uso - Pagina 9

Sfoglia online o scarica il pdf Manuale d'uso per Barca Advanced Elements DragonFly 2. Advanced Elements DragonFly 2 16. 1 or 2 person kayak

3.3 Inflating

IMPORTANT: Inflate your kayak in the following order. Failure to follow these instructions

may cause damage to your kayak. Do not over inflate. When fully inflated, the width of the

seating area should be between 15" to 16" at the widest point.

1. Inflate chamber 1 "main" until the kayak feels firm to the touch. Never over-inflate!

2. Inflate chamber 2 "floor" (using appropriate fitting) until firm (1.0 psi ONLY).

3. Inflate chamber 3, 4, 5 and 6 "wave deflectors" (using the appropriate fitting) until firm.

4. Make sure all valves are closed tightly and properly.

3.4 Over Inflation

CAUTION: Water temperature and weather will affect the air pressure of the kayak. In cold

weather and water your kayak will lose some pressure. If this occurs, you may want to add a

bit more air to the kayak to improve performance. In hot weather or prolonged sunlight, the air

inside the kayak will expand. You must let some air out of the appropriate chambers to prevent

the kayak from failing due to overpressure. You should avoid exposing your kayak to extreme

temperatures (hot or cold).

1. Remove the cap from chamber 1.

2. Push stem inward and rotate to deflate position.

3. Twist the valve bodies open on chambers 2, 3, 4, 5 and 6.

4. Once the chambers are deflated you can use your pump to vacuum out any additional air for

improved folding.

Diagram of Inflation Chambers

DragonFly2™ Inflatable Kayak Owner's Manual