Andatech PRODIGY Manuale d'uso - Pagina 4

Sfoglia online o scarica il pdf Manuale d'uso per Apparecchiature di prova Andatech PRODIGY. Andatech PRODIGY 20.

OPERATING INSTRUCTIONS

ATTACHING A SAMPLING CUP

• Tear the perforated section from the wrapper of a new

sampling cup.

• Pull back the wrapper to expose the bottom half of the

sampling cup.

• Ensuring the two small holes in the bottom of the sampling

cup are aligned with the sensor, insert the notched end of the

sampling cup into the slot on the right of the screen.

• Lower the other end of the sampling cup until it locks into

place.

• Remove remainder of wrapper from sampling cup and

discard.

• To discard the sampling cup, pull it out in the direction of the

arrow shown on the sampling cup.

ATTACHING A MOUTHPIECE

• Tear the perforated section from the wrapper of a new

mouthpiece.

• Pull back the wrapper to expose half the mouthpiece.

• Ensuring the two small holes in the bottom of the mouthpiece

are aligned with the sensor, insert the notched end of the

mouthpiece into the slot on the right of the screen (refer to

Image 1).

• Lower the other end of the mouthpiece until it snaps into place

(refer to image 2).

• Remove remainder of wrapper from mouthpiece and discard.

• To discard the mouthpiece after a test, slide the remove

mouthpiece button upwards (refer to image 3). This will eject

the mouthpiece from the unit.

• Use a new mouthpiece for each test.