Andersen Verilock 0106512 Manuale d'uso - Pagina 9
Sfoglia online o scarica il pdf Manuale d'uso per Sensori di sicurezza Andersen Verilock 0106512. Andersen Verilock 0106512 16. For a-series and 400 series windows and patio doors, 200 series patio doors and renewal by andersen windows
Battery Replacement Instructions - continued
A-Series Double-Hung Windows
1. Remove both screws. Do not remove or lift lock after
unscrewing.
2. Remove VeriLock sensor assembly.
3. Locate the VeriLock sensor battery compartment on
the bottom of the VeriLock sensor assembly.
4. Carefully remove battery cap.
5. Remove discharged battery from the VeriLock sensor
assembly using a small flat blade screwdriver to
carefully pry the battery from the terminal. (see battery
disposal information on page 5).
6. Replace the battery with a fresh CR-2025 lithium coin
cell battery into the battery ring, with the positive (+)
side facing out.
7. Reapply battery cap.
8. Reinstall VeriLock sensor assembly over sash lock.
9. Verify that the sensor is communicating with your
security system or self-monitoring application by
unlocking the window and checking for the unlocked
message and then opening the window and checking
for the window open message.
9142268
A-Series Double-Hung Windows
Small
Flat Blade
Screwdriver
9
User's Guide
NOTE: VeriLock sensor assembly
is installed on the right lock of
units with two locks, as viewed
from the interior.
VeriLock
Sensor
Assembly
Battery
Cap
CR-2025
Battery
Insert screwdriver
into slot end to
remove battery.