Dreamline ENCORE/BRAVO SHDR-1660580 Series Manuale di istruzioni per l'installazione - Pagina 7

Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Prodotto idraulico Dreamline ENCORE/BRAVO SHDR-1660580 Series. Dreamline ENCORE/BRAVO SHDR-1660580 Series 19. Shower and tub door

Stampa la pagina

Using a miter saw or hacksaw, cut the Upper Guide Rail (#02) 1/16" shorter than the top

dimension W from step #1. (W - 1/16" = finished cut length L) ( see Fig 2a)

The Bottom Guide Rail (#15) needs to be cut equally from both ends to keep the center guide

holes centered. (The Bottom Guide Rail (#15) has been precut for the model size. See Table A).

Using a miter saw or hack saw, cut the Bottom Guide Rail (#15) 3/4" shorter than the bottom

dimension W from step #1. (W - 3/4" = finished cut length L) (see Fig 2b)

Note: The Bottom guide rail (#15)

needs to be shorter than the Upper

guide rail (#02) because it fits between

the wall profiles, while the upper guide

rail fits wall-to-wall.

Table A

Model Size

Precut Bo om Rail Length

60" x 76"

59-3/8" (1508mm)

48" x 76"

47-3/8" (1203mm)

54" x 76"

53-3/8" (1356mm)

60" x 58"

59-3/8" (1508mm)

FOR

EXAMPLE: If the finished opening

W = 59", then 59"- 3/4" = 58-1/4"

finished cut length "L" will be 58-1/4".

(The Bottom rail length for the

60"model = 59-3/8" - 58-1/4" = 1-1/8"

1-1/8" divided by 2 = 9/16"

Cut 9/16" off from each end to a

finished cut length of 58-1/4").

Note that this is only an example

and the actual cut-off amount will

vary based on the actual finished

opening dimension.

ENCORE / BRAVO Manual Ver 1 Rev 4 11/2016

W-1/16" (1.5mm)

W-3/4" (18mm)

W= finished opening width

center bottom guide

3/8" (9mm)

Finished cut length L

See Fig 2a & 2b for details

Upper Guide Rail (#02)

W (finished opening) - 1/16"

= L (finished cut length)

Fig 2a

Bottom Guide Rail (#15)

W (finished opening) - 3/4"

= L (finished cut length)

3/8" (9mm)

Fig 2b