Dreamline UNIDOOR Istruzioni per l'installazione - Pagina 8

Sfoglia online o scarica il pdf Istruzioni per l'installazione per Involucro Dreamline UNIDOOR. Dreamline UNIDOOR 13. Shower door

the wall and insert the Wall anchors (13) into the holes.
Apply silicone along the Wall profile and around the holes. Fasten the Wall profile to the wall
with the Round head Screw ST4.2×30 (15). Then push the Stationary glass and Glass profile
assembly into the Wall profile.
See Fig. 10 for details.
11. Adjust the Stationary glass position to ensure
that when the glass door is closed, there is a gap
(1/16"-1/8") between the two glass panels.
To adjust and secure the stationary glass in place,
install the Bottom Bracket (19) to the Stationary
glass;
Mark the drilling hole for the bracket. Make sure
the mark is clear and visible and drill the hole
using Ø 1/8" drill bit.
Use the Round head screws ST4.2×25 (16) to
attach the Bottom Bracket (19) to the shower
base or the threshold. Cover the screw head with
Decorative cover (18).
See Fig. 11 for details.
12. After final adjustments of the Stationary glass
drill the holes in the Glass profile through
predrilled holes in the Wall profile using Ø 1/8" drill bit.
NOTE: You only need to drill through the first layer of the Glass
Profile.
Use Countersunk screws ST4.2×18 (14) to attach the Wall
profile to the Glass profile. Cover the exposed screw heads with
Decorative Plugs (17).
See Fig. 12 and Fig. 13 for details.
Rev 2.1
Fig
. 10
1
4
(1/16--1/8)"
Ø 1/8"
2
5
3
6
Fig
. 11
Ø 1/8"
1
2
3
8