ATIM ACW/LW8-MR1 Manuale d'uso - Pagina 11

Sfoglia online o scarica il pdf Manuale d'uso per Strumenti di misura ATIM ACW/LW8-MR1. ATIM ACW/LW8-MR1 17. Metering / state of dry contacts

Installation

NOTE

The antenna is integrated in the housing which must be installed vertically with the cable gland facing downwards.

It is advisable to open the box to access the terminal block. To do this, insert the

screwdriver into the slot and tilt it downwards to lift the internal tab (see photo

opposite).

Then pull on the back side to separate the two parts of the case.

For best results, it is recommended to install the box without environmental

obstruction and to place it at a minimum height of 1m50.

It must be mounted on a vertical support or fixed to a wall (especially not on a

metal post!).

The box is fixed on a flat wall or a tube according to the type of installation

desired.

The cable should not exceed 10m in length and should be shielded.

ATIM_ACW-MR1_UG_EN_V1.6

1,50m