ANDI WMA 7612 L Smontaggio - Pagina 10

Sfoglia online o scarica il pdf Smontaggio per Lavatrice ANDI WMA 7612 L. ANDI WMA 7612 L 14.

Stampa la pagina
25- THERMOSTAT KNOB
o Remove top plate and control panel.
o Pull out thermostat knob.
26- PROGRAM AND THERMOSTAT DISPLAYS
o Remove top plate and control panel.
o Release snaps inside the control panel which hold the displays. (When
reassemblying place the displays in the snaps, turn it so that the recess behind
and underneath the dislay look downwards. On the other hand turn the
thermostat or program knob so that
o the slot with cut look upwards. Now the knobs and displays match for correct
operation)

27- DETERGENT DISPENSER

o Remove top plate, control panel and the detergent drawer.
o Remove the screw securing detergent dispenser to the control panel support.
o Remove the clamps of tub inlet hose, vapour discharge hose and the hoses
between the valves and the detergent dispenser.
o Release the snap of the detergent dispenser from the spring holder bracket.
Push it first downwards then upwards for to dismount the dispenser.

28- CONTROL PANEL SUPPORT

o Remove top plate and control panel.
o Remove the screw securing the detergent dispenser. Disconnect the cables of
the components fixed to the support.
o Remove the 6 screws securing the control panel support to the cabinet.
29- TIMER (PROGRAMMER)
Remove : _
• Top plate.
• Drawer.
• Control panel.
• Program knob.
• The screw on the timer shaft. ( figure 12 )
• The cam by hand from the shaft.
• Two screws that attach the timer to the control panel support