Advanced micro peripherals DVICOMP-IS Manuale di riferimento hardware - Pagina 14

Sfoglia online o scarica il pdf Manuale di riferimento hardware per Hardware del computer Advanced micro peripherals DVICOMP-IS. Advanced micro peripherals DVICOMP-IS 17. Dvi to composite scan converter board

Stampa la pagina

2: Installation

TX0-

TX0/5 Shield

TX5+

TXC+

Note: This connector is compatible with the TMDS output of the VAC2000 board.

PWR – Auxiliary power input (may also be used to supply power to the stack)

Signal

Not connected

GND

+5v

-Plus

PCI1 - PC/104

Standard 32-bit PCI-104 bus PCI Rev 2.1 compliant, 3.3V operation.

The standard PCI bus signals are only connected to the mini PCI socket. Since

mini PCI is defined as 3.3v only (not 5v compliant), the DVICOMP-IS may only

serve as a 3.3v Add-in card when fitted with a module.

MINI1- mini PCI Type III 32-bit PCI (3.3V operation)

Standard 3.3v mini PCI bus expansion connector.

LEVEL1 – links 1-2 and 3-4

Used for IDSEL card selection.

The setting of the first two links on the LEVEL header determine the logical stack

position of the DVICOMP-IS on the PCI-104 stack. This setting routes the

appropriate IDSEL, PCICLK, REQ and GNT signals to the mini PCI card hosted on

the DVICOMP-IS card.

Document version A.01

bus.

DVICOMP-IS Hardware Reference Manual

TX0+

TX5-

TXC Shield

TXC-