Andon KD-5905 Manuale operativo - Pagina 14

Sfoglia online o scarica il pdf Manuale operativo per Monitor della pressione sanguigna Andon KD-5905. Andon KD-5905 16. Fully automatic arm cuff blood pressure monitor

Stampa la pagina

ELECTROMAGNETIC COMPATIBILITY INFORMATION

Guidance and manufacture's declaration - electromagnetic emissions
The [KD-5905] is intended for use in the electromagnetic environment specified below.
The customer or the user of the [KD-5905] should assure that it is used in such an environment.
Emissions test
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
Guidance and manufacturer's declaration - electromagnetic immunity
The [KD-5905] is intended for use in the electromagnetic environment specified below. The customer or the user of
the [KD-5905] should assure that it is used in such an environment.
IMMUNITY test
IEC 60601test level
Electrostatic
± 6 kV contact
discharge (ESD)
± 8 kV air
IEC 61000-4-2
Power frequency
3 A/m
(50/60 Hz)
magnetic field
IEC 61000-4-8
NOTE: U
is the a.c. mains voltage prior to application of the test level.
T
For ME EQUIPMENT and ME SYSTEMS that are not LIFE-SUPPORTING
Guidance and manufacturer's declaration - electromagnetic immunity
The [KD-5905] is intended for use in the electromagnetic environment specified below. The customer or the user
of the [KD-5905] should assure that it is used in such an environment.
DN:KD-5905-SMSY01 V1.0
For all ME EQUIPMENT and ME SYSTEMS
Compliance
The [KD-5905] uses RF energy only for its internal function.
Group 1
Therefore, its RF emissions are very low and are not likely to cause
any interference in nearby electronic equipment.
The [KD-5905] is suitable for use in all establishments other than
Class B
domestic and those directly connected to the public low-voltage
power supply network that supplies buildings used for domestic
Not applicable
purposes.
Not applicable
For all ME EQUIPMENT and ME SYSTEMS
Compliance level
± 6 kV contact
± 8 kV air
3 A/m
Table 1
Electromagnetic environment - guidance
Table 2
Electromagnetic environment -
Floors should be wood, concrete or
ceramic tile. If floors are covered with
synthetic material, the relative humidity
should be at least 30 %.
Power frequency magnetic fields should
be at levels characteristic of a typical
location in a typical commercial or hospital
environment.
Table 3
14 / 16
Operation Guide
guidance
Template version:1