Electrolux CH90 Libro di istruzioni - Pagina 13

Sfoglia online o scarica il pdf Libro di istruzioni per Cappa di ventilazione Electrolux CH90. Electrolux CH90 21. Cooker hood
Anche per Electrolux CH90: Libro di istruzioni (21 pagine)

Stampa la pagina

Fixing the first wall bracket No 2

Draw a horizontal line through the vertical

at 15mm from the ceiling as illustrated, or

from a horizontal line drawn between the

top of two adjoining wall cabinets. Place

the top edge of the bracket against the

line, aligning the centre of the bracket with

the vertical line. If, the alignment is correct

mark the centres for the keyhole fixing

screws (not supplied) as illustrated in Fig.

Fixing the second wall bracket No 2

Draw a horizontal line through the vertical

at X. X is determined by the height of the

upper chimney. Place the bottom edge of

the bracket against the line, aligning the

centre of the bracket with the vertical line.

If, the alignment is correct mark the

centres for the keyhole fixing screws (not

supplied) as illustrated in Fig. 4.

Splashback (Optional)

When the splashback is to be fitted, the

distance between the cooker hood and

the cooking appliance will be determined

by the height of the splashback B, as

illustrated in Fig. 4.

Position the splashback on the worktop,

ensuring the worktop is level first, as

illustrated in Fig. 4; then holding the

splashback against the wall mark the

position of the holes for the fixing screws.

The splashback must be fitted before

installing the cooker hood.

If the splashback is to be fitted in

conjunction with a slot-in cooker, or free

standing appliance then it will be

necessary to fix the splashback to the wall

using both the top and bottom wall fixing

screw holes.

Drill the holes for the fixing screws using

an 8mm masonry drill and fix the wall

brackets.

Note: If the hood is to be installed

onto a hollow construction or plaster

or partition board wall then special

fixing screws will be required (not

supplied).

Fig.4