Bose 901 Manuale d'uso - Pagina 13

Sfoglia online o scarica il pdf Manuale d'uso per Altoparlanti Bose 901. Bose 901 23. Vi direct/reflecting speaker system
Anche per Bose 901: Manuale d'uso (41 pagine), Istruzioni per il montaggio e l'assemblaggio (1 pagine), Manuale d'uso (12 pagine), Manuale di installazione e funzionamento (15 pagine), Manuale d'uso (20 pagine)

Using other equipment

Figure 8

Connecting a tape deck to

the 901 active equalizer

AM195438_03_V.pdf

5. Move the receiver BALANCE control to the extreme left and then to the extreme right.

This tests the left and right channel orientation. If the channels are reversed, check the

connections.

6. Turn off the receiver and temporarily unplug the 901

power outlet.

7. Turn your receiver back on. You should not hear any music through the system. If you

do, the equalizer is probably connected incorrectly. Check the equalizer connections.

8. Turn off the receiver before restoring AC power to the 901 equalizer. Plug the equalizer

back in to its AC outlet. The system is now ready for use.

You can use the Bose

901 active equalizer TAPE CONNECTION jacks for a tape deck,

VCR audio connection, signal processors, or other components. This will be necessary if

your receiver has only one tape connection and you have connected the equalizer to it. If

you connected the equalizer to the receiver's TAPE 2 connection, you can use TAPE 1 for

these components.

Before making any connections, turn off the receiver and components. Be sure the active

equalizer power indicator is off.

To add a tape deck or VCR:

1. Use cables with RCA connectors at each end. One color (usually red) is for right (R)

channel connections and the other connector is for left (L) channel connections.

2. Connect the TAPE RECORDER OUTPUT of the equalizer to the LINE IN/REC of the tape

deck. Connect right channel to right channel and left channel to left channel.

3. Connect the TAPE RECORDER INPUT of the equalizer to the LINE OUT/PLAY of the

tape deck. Connect right channel to right channel and left channel to left channel.

Note: To use an external signal processor, or to add a graphic equalizer, contact Bose for

more information. Refer to the inside back cover of this guide.

A free booklet is available (USA only): Guide to Optional System Connections for Bose

901

Direct/Reflecting

Speaker Systems. Ask for part number 149393.

November 21, 2001

Setting Up

active equalizer from its AC (mains)