Bose QC 20 DOMANDE E RISPOSTE - Pagina 10

Sfoglia online o scarica il pdf DOMANDE E RISPOSTE per Cuffie Bose QC 20. Bose QC 20 15. Acoustic noise cancelling headphones

Stampa la pagina

Bose

How do I differentiate between the

different sizes of StayHear

How do the StayHear

stable fit?

How are the StayHear

and replaced on the earbud?

How do I put the earpieces in my ears?

For internal and reseller distribution only – Bose confidential.

Acoustic Noise Cancelling

20i

Acoustic Noise Cancelling

The StayHear

+ tips?

each tip that tells you what size it is.

 White = Small

 Gray = Medium

 Black = Large

This color-coding is the same as other Bose

+ tips provide a

The StayHear

your ear. They use the ridge of your ear for support and provide

significantly improved stability, while the soft material and rounded profile

delivers a comfortable fit for long-term wear.

+ tips removed

The StayHear

by gently peeling up from the large rounded side, ideally near the

bottom.

Caution: Do not pull from the tip wing to remove the tips, as this may

damage them.

To put on another tip, make sure you match the tip to the correct side

earpiece. The tips and the earpieces are marked L and R for your

convenience. Slide the replacement tip over the nozzle of the

headphone. Press the tip securely into place until you feel it latch. The

ridge on the headphone housing should fit into the slot on the inside of

the tip.

First, locate the L and the R on the headset, and match the StayHear

tips to their corresponding side. Insert the headphone with the opening

toward your ear and the flexible wing pointing upward. The wing of the

tip fits just under your ear ridge.

To put the tip in your ear:

1. Tilt the earpiece forward so it lines up with your ear canal.

2. Insert the earpiece into the ear just enough for it to gently rest against

the entrance of the ear canal. (There is no need to force it into the ear

canal.)

3. Tilt the earpiece back and, if necessary, lightly press the flexible tip wing

under the ear ridge until it is secure.

The tips are designed to rest gently against the opening of the ear canal

and sit comfortably yet securely in the bowl of the ear. They should be the

only part of the headphones in contact with the ear.

headphones

+ tips are color-coded. There is a small colored ring inside

+ tips have an extended flexible wing that sits in the bowl of

+ tips will resist unintentional removal, but can be taken off

in-ear headphones.

CC011967_NRT Nautilus QA R3 3