Advanced Screenworks MYSTIC Z-BOX Istruzioni - Pagina 3

Sfoglia online o scarica il pdf Istruzioni per Motore Advanced Screenworks MYSTIC Z-BOX. Advanced Screenworks MYSTIC Z-BOX 4.

F. HOW TO: IF LIMITS NEED TO BE RESET. DO THE FOLLOWING:

1. ALWAYS SET THE LOWER LIMIT FIRST

2. USE THE REMOTE TO MOVE THE BOTTOM BAR TO ITS LOWER LIMIT

3. USING A PAPER CLIP OR PIN, PRESS THE PROGRAM BUTTON FOUND IN THE HOLE ON THE

BACK OF THE HAND HELD REMOTE. THE MOTOR WILL JOG TO CONFIRM THAT IT IS OPEN

FOR PROGRAMMING

4. PRESS UP OR DOWN BUTTON TO FINE TUNE YOUR LIMIT.

5. WHEN THE DESIRED POSITION IS REACHED PRESS STOP BUTTON TO IDENTIFY THIS AS THE

LIMIT

6. PRESS THE PROGRAM BUTTON. THE MOTOR WILL JOG OR BEEP 3 TIMES TO CONFIRM THAT

IT IS CLOSED TO PROGRAMMING. LOWER LIMIT PROGRAMMING IS COMPLETE.

7. NOW SET THE UPPER LIMIT AS FOLLOWS

(A) USE REMOTE TO MOVE THE BOTTOM BAR TO THE UPPER LIMIT

(B) USING A PAPER CLIP OR PIN, PRESS THE PROGRAM BUTTON FOUND IN THE HOLE ON

THE BACK OF THE HAND HELD REMOTE. THE MOTOR WILL JOG OR BEEP 5 TIMES TO

CONFIRM THAT IT IS OPEN FOR PROGRAMMING

(D)WHEN THE DESIRED POSITION IS REACHED PRESS THE STOP BUTTON TO IDENTIFY THIS

AS THE LIMIT

(E) PRESS THE PROGRAM BUTTON. THE MOTOR WILL JOG OR BEEP 3 TIMES TO CONFIRM

THAT IT IS CLOSED TO PROGRAMMING.

G. HOW TO: SYNCHRONIZE A 2

MOTOR:

1. PRESS AND HOLD THE STOP BUTTON ON THE PRIMARY HAND HELD REMOTE. THE MOTOR

WILL JOG OR BEEP 5 TIMES. RELEASE THE STOP BUTTON.

2. PRESS AND RELEASE THE UP BUTTON ON THE 2

3 TIMES TO CONFIRM THAT THE 2 REMOTES ARE SYNCHRONIZED.

REMOTE (EITHER A 2

HAND HELD OR WALL MOUNT) TO THE

REMOTE. THE MOTOR WILL JOG OR BEEP