Anova F3022 Istruzioni per il montaggio - Pagina 2

Sfoglia online o scarica il pdf Istruzioni per il montaggio per Arredamento per interni Anova F3022. Anova F3022 2. Flat bench

4. Attach the other Bench Support to the Bench Seat in the

same manner, installing the Bolts from the outside inward.

Leave the hardware finger tight.

5. Turn the Bench upright. Tighten all hardware while

checking with a Level.

6. Move the assembled Bench to the desired location.

NOTE: The foot of each Bench Support features an 8" square

plate with four .5" diameter mounting holes. Mounting

hardware, appropriate to the surface the bench will be

mounted to, must be purchased by the user. Follow any

directions provided with the mounting hardeware.

7. Retighten hardware two weeks after initial assembly.

•

Furniture must not be used other than for its intended purpose and should be inspected regularly for loose,

missing, or broken hardware, and general instability.

•

Furniture that is damaged or appears to be unstable must be removed from service and be repaired or replaced.

wArnInG

•

Repairs must be made using only factory authorized parts and methods.

cAre AnD

•

Do not drag the assembled unit across any surface.

mAIntenAnce

•

This product requires only periodic cleaning with a sponge and a solution of mild detergent and water to

remove surface dirt. Do not clean with a solvent or petroleum based products.

211 No

St. Louis, MO 63141

rth Lindbergh Blvd.

Washer

and Bolt

tel: 888.535.5005

web: anovafurnishings.com

Washer and

Flanged Nut

10/2012