Anova CC251T Manuale di istruzioni - Pagina 14

Sfoglia online o scarica il pdf Manuale di istruzioni per Tagliaerba Anova CC251T. Anova CC251T 19.

can also be beneficial for your lawn. When you mow the leaves, make sure they are dry and not too thick on

the lawn. Don't wait for all the leaves to be off the trees before cutting.

WARNING:If you hit a foreign object, stop the engine. Remove the spark plug wire, thoroughly inspect

the mower for any damage, and repair the damage before restarting and operating. Extensive mower

vibration during operation is an indication of damage. The unit must be promptly inspected and repaired.

7.6 GRASS COLLECTOR

There is a window on the rear deck. You can see the condition of the grass catcher through the window. If the

catcher is full of grass, it will empty and clean the bag, make sure it is clean and make sure its mesh is vented.

Figure 11

Fig.11

7.7 COVER

The underside of the mower deck should be cleaned after each use to prevent the buildup of grass clippings,

leaves, dirt, or other debris. If these residues are allowed to accumulate, they will invite rust and corrosion,

and may prevent proper mulching. The deck can be cleaned by tilting the mower and scraping with a suitable

tool (make sure the spark plug wire is disconnected).

7.8 INSTRUCTIONS FOR HEIGHT ADJUSTMENT

CAUTION:Do not at any time make any adjustments to the mower without first stopping the engine and

disconnecting the spark plug wire.

CAUTION:Before changing cutting height, stop mower and disconnect spark plug wire.

Your mower is equipped with a center height adjustment lever that offers 10

Height (blade to ground) can be adjusted from 25mm to 75mm (10 height positions).

1. Stop the mower and disconnect the spark plug wire before changing the mower's cutting height.

2. The central height adjustment lever offers you 10 different height positions.

To change the height of the rear wheel, squeeze the adjustment lever towards the wheel, moving it up or

down to the selected height.

Fig.12

positions.(Fig.12)