Anova CC400P Manuale d'uso - Pagina 11

Sfoglia online o scarica il pdf Manuale d'uso per Tagliaerba Anova CC400P. Anova CC400P 14.

CHANGING BLADES

To replace the blade, undo the screw. Empty the oil tank before removing the blade

Reinstall as illustrated . Tighten the screw properly. Tightening torque 45 Nm. When replacing the

blade, the blade screw should also be replaced.

. CHANGE OIL

1. Let engine runs out of out, and wait until engine

Stopped and cooled slightly.

2. Discoonnect spark plug wire and keep away from

Spark plug.

3. When engine is still warm, remove oil drain plug(A).

Drain oil into a proper container.(Fig.12)

4. Clean the oil drain plug beforg restoring it back.

5. Place engine level. Remove dipstick.Add new recom-

Mended oil about 0.3L slowly to upper limit on dip-

Stick, Don't overfill.

6. Replace dipstick

Spark Plug

Once the engine has cooled, remove the spark plug and clean the plug with a wire brush. Using a feeler

gauge, set the gap to 0.75 mm( 0.030"). Refit the spark plug taking care not to overtighten.

Blade ref. CC400P-18