DSC PC1550 Manuale di istruzioni - Pagina 5

Sfoglia online o scarica il pdf Manuale di istruzioni per Sistema di sicurezza DSC PC1550. DSC PC1550 17. 4 digit master code
Anche per DSC PC1550: Manuale di istruzioni (17 pagine), Manuale di istruzioni (17 pagine), Manuale di istruzioni (9 pagine), Manuale di istruzioni (17 pagine), Manuale di istruzioni (12 pagine)

MASTER CODE

The 4 digit Master Code is used to arm and disarm the security system, to

program additional security codes and to change other system features. The

Master Code will be supplied to you by your installer. All keypad entries are

made by pressing one key at a time. (See Additional Codes section)

Check the following items before arming the system:

Bypass light

If the "Bypass" light is ON, insure that zones are intentionally bypassed before

arming the system (See Zone Bypassing section).

Trouble light

If the " Trouble" light is ON, check to see what the trouble condition is and call

for service. (See Viewing Trouble Conditions section).

Ready light

If the "Ready" light is NOT ON, check to see that all doors and windows are

closed and that motion is stopped in areas covered by motion detectors. The

system cannot be armed unless the "Ready" light is ON indicating that all

zones are closed.

NOTE: The system may be armed with a zone bypassed or a trouble present

but your security protection will be reduced.

To Arm

Enter your 4 digit access code. As each digit is entered, the keypad sounder will

beep. If the correct access code is entered, the keypad sounder will beep

quickly and the "Armed" light will come ON.

If the access code was entered incorrectly or the "Ready" light comes ON, the

keypad buzzer will sound steadily for 2 seconds. If this occurs, press the [#] key

and re-enter your access code.

When the correct access code is entered and the "Armed" light comes ON, exit

the premises through the door indicated by your installer as the Exit-Entry door.

At the end of the exit delay period, all lights, except the "Armed" light, will go out

and the system will be armed. The exit time delay can be changed by your

installer.

AUTO-BYPASS OPTION - HOME-AWAY ARMING

This feature, if selected by your installer, will allow you to arm your system with any

valid access code and the system will automatically bypass the interior zones. The

"Bypass" light will come on. If you exit within the allowed exit time, the system will

automatically activate the interior zones and the "Bypass" light will go out. This

feature is designed to save the customer from having to manually bypass interior

zones each time they wish to arm the system and remain at home.

In residential applications where the system has been armed and the interior

zones are automatically bypassed, the interior zones can be reactivated from a

keypad that is outside the interior zone's protection area. To reactivate the interior

∗

zones, press [

] then [1] and the "Bypass" light will go out.