DSC FSA-410 Series Istruzioni per l'installazione e il funzionamento - Pagina 4

Sfoglia online o scarica il pdf Istruzioni per l'installazione e il funzionamento per Allarme fumo DSC FSA-410 Series. DSC FSA-410 Series 4.

Stampa la pagina

DSC FSA-410 Series Istruzioni per l'installazione e il funzionamento

Model

FSA-410A, FSA-410B, FSA-410C NO

FSA-410AT, FSA-410BT,

FSA-410CT

FSA-410AR, FSA-410BR,

FSA-410CR

FSA-410ART, FSA-410BRT,

FSA-410CRT

FSA-410AS, FSA-410BS,

FSA-410CS

FSA-410AST, FSA-410BST,

FSA-410CST

FSA-410ARS, FSA-410BRS,

FSA-410CRS

FSA-410ARST, FSA-410BRST,

FSA-410CRST

FSA-410ALST, FSA-410BLST,

FSA-410CLST

FSA-410ALRST, FSA-410BLRST,

FSA-410ClRST

FCC Compliance Statement

CAUTION: Changes or modifications not expressly approved by DSC could void your

authority to use this equipment.

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turn-

ing the equipment off and on, the user is encouraged to try to correct the interference by one

or more of the following measures:

• Re-orient the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/television technician for help.

The user may find the following booklet prepared by the FCC useful: "How to Identify and

Resolve Radio/Television Interference Problems". This booklet is available from the U.S.

Government Printing Office, Washington D.C. 20402, Stock # 004-000-00345-4.

Industry Canada Compliance Statement

This Class B digital apparatus meets all requirements of the Canadian interference-causing

equipment regulations.

Cet appareil numérique de la Classe B respecte toutes les exigences de règlement sur le maté-

riel brouilleur du Canada.

SOFTWARE PRODUCT LICENSE

The SOFTWARE PRODUCT is protected by copyright laws and international copyright treaties, as well as other intellec-

tual property laws and treaties. The SOFTWARE PRODUCT is licensed, not sold.

1. GRANT OF LICENSE This EULA grants You the following rights:

(a) Software Installation and Use - For each license You acquire, You may have only one copy of the SOFTWARE

PRODUCT installed.

(b) Storage/Network Use - The SOFTWARE PRODUCT may not be installed, accessed, displayed, run, shared or used

concurrently on or from different computers, including a workstation, terminal or other digital electronic device

("Device"). In other words, if You have several workstations, You will have to acquire a license for each workstation

where the SOFTWARE will be used.

license installed at any given time. You may use the back-up copy solely for archival purposes. Except as expressly pro-

vided in this EULA, You may not otherwise make copies of the SOFTWARE PRODUCT, including the printed materials

accompanying the SOFTWARE.

2. DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS

(a) Limitations on Reverse Engineering, Decompilation and Disassembly - You may not reverse engineer, decompile, or

disassemble the SOFTWARE PRODUCT, except and only to the extent that such activity is expressly permitted by appli-

cable law notwithstanding this limitation. You may not make any changes or modifications to the Software, without the

written permission of an officer of DSC. You may not remove any proprietary notices, marks or labels from the Software

Product. You shall institute reasonable measures to ensure compliance with the terms and conditions of this EULA.

(b) Separation of Components - The SOFTWARE PRODUCT is licensed as a single product. Its component parts may

not be separated for use on more than one HARDWARE unit.

PRODUCT is licensed with the HARDWARE as a single integrated product. In this case, the SOFTWARE PRODUCT

may only be used with the HARDWARE as set forth in this EULA..

(d) Rental - You may not rent, lease or lend the SOFTWARE PRODUCT. You may not make it available to others or post

it on a server or web site.

Tech Support: 1-800-387-3630 (Canada & USA) or 905-760-3000

Printed in Czech 17

Aux

LED

Heat

Siren

Relay

Output

YES

Specifications

Max. Alarm

Diameter (base) . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.8in (147mm)

Current

Draw

Height (including base) . . . . . . . . . . . . . . . . . . . 2.077in (528mm)

25mA

Operating Temperature with Heat Detector . 32º-100ºF (0º-37.8ºC)

25mA

Humidity . . . . . . . . . . . . . . . . . . . . 5%-93% RH, non-condensing

40mA

Operating Voltage Range. . . . . . . . . . . . . . . . . . . . . . . 10-30 VDC

Maximum Standby Current . . . . . . . . . . . . . . 20μA@12 or 24VDC

40mA

Maximum Alarm Current . . . . . . . . . . . . . . . . . . . . . .25mA-90mA

75mA

Smoke Sensitivity ULC . . . . . . . . . . . . . 2% ± 0.5%/ft obscuration

Smoke Sensitivity UL . . . . . . . . . . . . . . 3% ± 0.8%/ft obscuration

75mA

Heat Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135ºF (57ºC)

Siren Alarm Pattern ULC . . . . . . . . . . . . . . . . . . Continuous Beeps

90mA

Siren Alarm Pattern UL . . . . . . . . . . . Evacuation Temporal Pattern

90mA

Minimum Remote LED Resistance:

12V system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500 Ohm

75mA

24V system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1000 Ohm

90mA

Maximum Remote LED output (if equipped) . . . . . . . . . . . . 25mA

Auxiliary Relay Rating (Form C Relay) . . . . . 2A @ 30V

Alarm Relay Rating (Form A Relay) . . . . . 2.0A @ 30V

(e) Software Product Transfer - You may transfer all of Your rights under this EULA only as part of a permanent sale or

transfer of the HARDWARE, provided You retain no copies, You transfer all of the SOFTWARE PRODUCT (including

all component parts, the media and printed materials, any upgrades and this EULA), and provided the recipient agrees to

the terms of this EULA. If the SOFTWARE PRODUCT is an upgrade, any transfer must also include all prior versions of

the SOFTWARE PRODUCT.

(f) Termination - Without prejudice to any other rights, DSC may terminate this EULA if You fail to comply with the

terms and conditions of this EULA. In such event, You must destroy all copies of the SOFTWARE PRODUCT and all of

its component parts.

(g) Trademarks - This EULA does not grant You any rights in connection with any trademarks or service marks of DSC

or its suppliers.

3. COPYRIGHT - All title and intellectual property rights in and to the SOFTWARE PRODUCT (including but not lim-

ited to any images, photographs, and text incorporated into the SOFTWARE PRODUCT), the accompanying printed

materials, and any copies of the SOFTWARE PRODUCT, are owned by DSC or its suppliers. You may not copy the

printed materials accompanying the SOFTWARE PRODUCT. All title and intellectual property rights in and to the con-

tent which may be accessed through use of the SOFTWARE PRODUCT are the property of the respective content owner

and may be protected by applicable copyright or other intellectual property laws and treaties. This EULA grants You no

rights to use such content. All rights not expressly granted under this EULA are reserved by DSC and its suppliers.

4. EXPORT RESTRICTIONS - You agree that You will not export or re-export the SOFTWARE PRODUCT to any

country, person, or entity subject to Canadian export restrictions.

5. CHOICE OF LAW - This Software License Agreement is governed by the laws of the Province of Ontario, Canada.

6. ARBITRATION - All disputes arising in connection with this Agreement shall be determined by final and binding

arbitration in accordance with the Arbitration Act, and the parties agree to be bound by the arbitrator's decision. The

place of arbitration shall be Toronto, Canada, and the language of the arbitration shall be English.

7. LIMITED WARRANTY

(a) NO WARRANTY - DSC PROVIDES THE SOFTWARE "AS IS" WITHOUT WARRANTY. DSC DOES NOT

WARRANT THAT THE SOFTWARE WILL MEET YOUR REQUIREMENTS OR THAT OPERATION OF THE

SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE.

(b) CHANGES IN OPERATING ENVIRONMENT - DSC shall not be responsible for problems caused by changes in

the operating characteristics of the HARDWARE, or for problems in the interaction of the SOFTWARE PRODUCT with

non-DSC-SOFTWARE or HARDWARE PRODUCTS.

STATUTE IMPLIES WARRANTIES OR CONDITIONS NOT STATED IN THIS LICENSE AGREEMENT, DSC'S

ENTIRE LIABILITY UNDER ANY PROVISION OF THIS LICENSE AGREEMENT SHALL BE LIMITED TO

THE GREATER OF THE AMOUNT ACTUALLY PAID BY YOU TO LICENSE THE SOFTWARE PRODUCT

AND FIVE CANADIAN DOLLARS (CAD$5.00). BECAUSE SOME JURISDICTIONS DO NOT ALLOW THE

EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE

ABOVE LIMITATION MAY NOT APPLY TO YOU.

(d) DISCLAIMER OF WARRANTIES - THIS WARRANTY CONTAINS THE ENTIRE WARRANTY AND

SHALL BE IN LIEU OF ANY AND ALL OTHER WARRANTIES, WHETHER EXPRESSED OR IMPLIED

(INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR

PURPOSE) AND OF ALL OTHER OBLIGATIONS OR LIABILITIES ON THE PART OF DSC. DSC MAKES NO

OTHER WARRANTIES. DSC NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON PURPORTING

TO ACT ON ITS BEHALF TO MODIFY OR TO CHANGE THIS WARRANTY, NOR TO ASSUME FOR IT ANY

OTHER WARRANTY OR LIABILITY CONCERNING THIS SOFTWARE PRODUCT.

(e) EXCLUSIVE REMEDY AND LIMITATION OF WARRANTY - UNDER NO CIRCUMSTANCES SHALL DSC

BE LIABLE FOR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES BASED UPON

BREACH OF WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, STRICT LIABILITY, OR ANY OTHER

LEGAL THEORY. SUCH DAMAGES INCLUDE, BUT ARE NOT LIMITED TO, LOSS OF PROFITS, LOSS OF

THE SOFTWARE PRODUCT OR ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST OF SUBSTI-

TUTE OR REPLACEMENT EQUIPMENT, FACILITIES OR SERVICES, DOWN TIME, PURCHASERS TIME,

THE CLAIMS OF THIRD PARTIES, INCLUDING CUSTOMERS, AND INJURY TO PROPERTY. WARNING:

DSC recommends that the entire system be completely tested on a regular basis. However, despite frequent testing, and

due to, but not limited to, criminal tampering or electrical disruption, it is possible for this SOFTWARE PRODUCT to fail

to perform as expected.

1134

DSC, Toronto, Canada

2011

1134-CPD-002

(Resistive)

EN54-5/A1 (2002)

EN54-7/A2 (2006)

Point type smoke and

heat detector