Ansmann Racing xBase Multi Manuale di istruzioni per l'uso - Pagina 3

Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Caricabatterie Ansmann Racing xBase Multi. Ansmann Racing xBase Multi 16.

SAFETY MEASURES AND PRECAUTIONS

! Read the operating instructions carefully before use

! Charge only NiCd or NiMH batteries. NOT primary cells, Lead Acid, LiIon or LiPolymer batteries - Risk of Explosion and chemical danger

! Check the battery manufacturers instructions. Do not charge batteries with too high charging current. - Risk of Explosion and chemical danger

! Connect the charger to a suitable mains supply only.

! Connect the batteries with right polarity to the charger.

! When not in use, disconnect the battery from the charger and the charger from the mains.

! Do not charge hot batteries. Batteries must be at ambient temperature before charging.

! Do not expose the battery charger to rain, damp or hot conditions.

! Do not charge the batteries twice. Charging is only allowed after a prior discharge.

! Do not leave the charger unattended during operation.

! Do not open equipment or carry out repairs. Authorized personnel may only carry out repairs.

! Do not cover equipment or obstruct ventilation, otherwise it may over-heat. Do not expose to direct sunlight.

! Do not charge more than one battery pack simultaneously.

! Charge only cells of the same type and capacity as a battery pack.

! Keep batteries, battery charger and cables away from combustible materials.

! Avoid sparking as there maybe gases present from the batteries.

! Never place the charger inside the engine compartment. Keep leads away from moving parts.

xBase Multi

Input voltage:

Battery Types:

Output 1

Output 2

Output 3

Output 4

Output 5

Weight:

Dimensions L x W x H in mm:

1_manual_xbase_multi_07-02.indd 3

Part. No. 151000020

230 V 50 Hz

4-10 NiCd cells

4-10 NiMH cells

4,8 V DC / 700 mA; 12,0 V DC 600 mA

4,8 V DC / 200 mA; 12,0 V DC 140 mA

4,8 V DC / 150 mA; 12,0 V DC 110 mA

4,8 V DC / 70 mA; 12,0 V DC 50 mA

530 g

119 x 102 x 85

Prozessfarbe Schwarz

21.02.2007 17:13:56 Uhr